Claas ELIOS 200 Warning Lights and Symbols (Meaning and Fixes)

Quick answer: These dashboard warning lights follow the ISO 2575 international standard. A red symbol means stop the machine and check immediately, amber or yellow means service soon, and green or blue symbols are normal status indicators. Each symbol below is explained with its meaning, the most likely cause, and the recommended action.

The Claas ELIOS 200 combine harvester features a comprehensive instrument cluster that keeps you informed about machine status and potential issues. The warning lights are color-coded: red for immediate stop, amber for caution, and green/blue for active functions. Understanding these indicators helps maintain optimal performance and prevents costly downtime.

How to read the colors: Red lights demand immediate action and stopping the machine; amber lights indicate a warning or service need; green or blue lights show that a system is active or functioning normally.

Claas ELIOS 200 Warning Light Symbols

SymbolNameColorWhat it meansWhat to do
Master Warning (Stop)REDOn the ELIOS 200, this red light indicates a critical fault that requires an immediate engine shutdown to prevent damage.Stop the engine and consult the diagnostic fault code display.
Master CautionAMBERThis amber light alerts you to a non-critical issue that still needs attention before continued operation.Check the message center for details and address as recommended.
Check Engine (MIL)AMBERIlluminates when the ELIOS 200's engine control unit detects a fault in emissions or performance systems.Schedule a diagnostic check to avoid reduced power or fuel efficiency.
Engine Oil PressureREDIndicates critically low engine oil pressure, which can cause severe engine wear in your ELIOS 200.Stop the engine immediately and check oil level and pressure sensor.
Battery / ChargingREDThe charging system is malfunctioning on your ELIOS 200, risking a dead battery during operation.Check alternator belt tension and battery connections; if persistent, have alternator tested.
Coolant TemperatureREDEngine coolant temperature is too high; the ELIOS 200's engine may overheat if not addressed.Stop the engine, let it cool, and check coolant level and radiator for blockages.
ATTransmission TempAMBERThe hydrostatic transmission fluid temperature in your ELIOS 200 is higher than normal.Reduce load or shift to a lower gear; if light stays on, inspect cooling system and fluid level.
Brake SystemREDIndicates a fault in the hydraulic brake system; braking performance may be compromised.Stop the machine safely and check brake fluid level and lines for leaks.
PParking BrakeREDThe parking brake is engaged or not fully released; movement is restricted on the ELIOS 200.Ensure parking brake is released before driving; if light stays on, check switch or actuator.
Seat BeltREDThe seat belt is not fastened; safety system on the ELIOS 200 will alert until buckled.Fasten your seat belt before operating the combine.
Glow Plug / PreheatAMBERGlow plugs are active or have a fault; on cold starts, wait until this light goes out before cranking.If flashing, have glow plug system inspected by a dealer.
DPF / RegenerationAMBERThe diesel particulate filter is in regeneration mode or needs attention; on the ELIOS 200, this may affect performance.If steady, regeneration in progress; if flashing, clean or replace filter.
DEF / AdBlueAMBERDEF fluid level is low or quality is poor; the ELIOS 200's SCR system requires proper DEF to reduce emissions.Top up DEF tank with correct fluid; if light persists, check DEF system components.
Water in FuelAMBERWater detected in the fuel filter/water separator; can cause injector damage in your ELIOS 200.Drain the water separator immediately; replace filter if needed.
Low FuelAMBERFuel level is low; the ELIOS 200 may run out of fuel if not refilled soon.Refuel as soon as possible to avoid air in the fuel system.
High BeamBLUEHigh beam headlights are activated on your ELIOS 200 for improved visibility.Dim when approaching other vehicles to avoid glare.
Power Steering (EPS)REDElectric power steering failure; steering effort increases significantly on the ELIOS 200.Stop the machine and have the EPS system inspected immediately.
Hydraulic SystemAMBERLow hydraulic oil level or system fault; affects header and feeder operations on the ELIOS 200.Check hydraulic fluid level and look for leaks; contact service if light stays on.
Air FilterAMBEREngine air filter is clogged; reduced power and increased fuel consumption may occur.Inspect and replace the air filter if necessary.
Fuel Filter / Water SeparatorAMBERFuel filter needs replacement or water in fuel is present; affects engine performance on the ELIOS 200.Replace fuel filter and drain water separator as per maintenance schedule.
Service / Hour MeterAMBERScheduled maintenance interval has been reached; the ELIOS 200 requires service shortly.Refer to operator's manual for required service actions.
Work LightsGREENWork lights are turned on for nighttime operation of the ELIOS 200.Turn off when not needed to preserve battery life.
Beacon / Rotating LightGREENWarning beacon is activated; increases visibility of the ELIOS 200 on public roads.Activate when operating near traffic or in low-light conditions.
High Exhaust Temp (HEST)AMBERExhaust temperature is elevated due to regeneration or high load; on the ELIOS 200, this is normal during DPF regeneration.Avoid parking near flammable materials; if light stays on, check regeneration system.

24 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.

Most Important Warning Lights

Engine Overheat

Common causes

  • Coolant leak
  • Radiator clogged with chaff
  • Failed cooling fan

What to do

On the ELIOS 200, stop the engine immediately, allow it to cool, then clean the radiator cores and check coolant level; if the issue persists, inspect the fan belt and thermostat.

Hydraulic System Failure

Common causes

  • Low hydraulic oil level
  • Hydraulic hose burst
  • Pump failure

What to do

For the ELIOS 200, check hydraulic oil level in the reservoir and top up if low; inspect all hoses and replace any that are damaged; if the problem continues, contact a Claas technician to test the hydraulic pump.

Transmission Overheating

Common causes

  • Excessive load in heavy crop
  • Low transmission fluid
  • Clogged transmission oil cooler

What to do

Reduce ground speed or lift the header to decrease load; check transmission fluid level and add as needed; clean the oil cooler fins with compressed air to improve airflow.

DPF Clogging

Common causes

  • Frequent short operations
  • Poor fuel quality
  • Failed regeneration

What to do

Perform a stationary regeneration if the light flashes; on the ELIOS 200, ensure the combine is outdoors and follow the procedure in the manual; if regeneration fails, have the DPF professionally cleaned or replaced.

Electrical System Fault

Common causes

  • Loose battery connections
  • Alternator failure
  • Faulty sensor

What to do

Inspect battery terminals on the ELIOS 200 for corrosion and tightness; test the alternator output with a multimeter; if the warning persists, have the wiring harness checked for damage.

Frequently Asked Questions

Why does my ELIOS 200 show a Master Warning light after starting?

This could be due to a critical fault detected during the self-check; check the display for a fault code and consult your dealer if the light doesn't go out after a few seconds.

How do I perform a DPF regeneration on the ELIOS 200?

When the DPF regeneration light is steady, regeneration is automatic; if it flashes, stop the combine, engage the parking brake, and activate manual regeneration via the control terminal. Ensure the machine is in an open area.

What should I do if the coolant temperature light comes on during harvesting?

Immediately reduce engine load by lifting the header and decreasing ground speed; if the light remains red, stop the engine and let it cool. Check coolant level and clean the radiator – common issues on the ELIOS 200.

Can I continue working with the amber hydraulic system light on?

No, head back to the workshop as soon as possible; the light indicates low oil or a leak that could cause sudden loss of header control, leading to damage or downtime.

How often should I change the fuel filter on the ELIOS 200?

Every 250 hours or annually – more often if you use biodiesel. The fuel filter light will alert you when replacement is needed; don't ignore it to prevent injector issues.

What does the battery warning light mean if it flickers?

A flickering battery light on the ELIOS 200 often points to a loose serpentine belt or failing alternator; check belt tension and battery connections; if the problem persists, have the charging system tested.